Testing Hay Moisture Before You Stack It
Hay baled too wet heats in the stack — losing feed value, growing mould, and in the worst cases catching fire. A moisture probe and a few minutes per load turn that gamble into a measurement.
Why Moisture Is the Number That Matters
Cut hay keeps respiring and drying after it is baled, and the bacteria and moulds that live on it generate heat as they work. In dry hay that heat is trivial. In hay baled damp, the stack becomes a slow oven: temperatures climb, sugars and proteins cook into forms horses cannot use, mould blooms through the bale, and in the extreme the stack can smoulder into spontaneous combustion — the barn fire every hay buyer fears, arriving weeks after delivery day. Moisture content is the single number that predicts all of it, which is why experienced hay growers talk about moisture the way sailors talk about weather: as the condition everything else depends on. The pages elsewhere in this library on storing hay safely assume this measurement happens; this page is about making it.
The Tools: Probes, and What the Numbers Mean
The standard tool is a hay moisture probe — a long steel spear with a sensor tip, pushed deep into the bale and read on a dial or digital display, often with a built-in temperature reading on better models. As a working guide, small square bales are generally considered safe to stack at moisture readings under about 20 percent, with large round and large square bales needing to be drier — roughly under 16 to 18 percent — because their density traps heat more effectively; your supplier, extension service, or the probe maker's chart will give the figures for your bale type, and wetter hay than the limit is hay to leave in the field or spread to dry, not hay to stack and hope about. Readings vary through a load, so the measurement is a sample, never a single poke.
How to Sample a Load Honestly
Probe several bales from different parts of the load — the outside bales dry fastest and flatter the average — pushing the probe into the centre of the bale's end, along its core, and taking the highest readings as the load's honest number rather than averaging away the wettest bale. Wet pockets matter: one damp bale in a stack is where heating starts. If a stack is already made and in question, probe between bales deep into the stack and check temperature the same way — a stack that is heating announces itself in rising internal temperatures, and the thresholds for action (monitoring closely, pulling a stack apart, calling the fire service for a genuinely hot stack) are set out in fire-service and extension guidance that every hay barn should have printed and posted before it is needed, not searched for during.
Buying, Storing, and the Conversation With Your Grower
Moisture testing changes the buying conversation from appearance to evidence: a probe reading taken together at delivery settles arguments that colour and smell cannot, and good growers welcome it because it certifies their work. For the barn, the routine folds into the hay-storage habits in this library — stacks off the ground on pallets, air gaps between stacks, no damp hay against barn walls, and new hay watched for the first weeks, when heating peaks. Reject or quarantine the wet load, even at a discount: mouldy hay costs more in dust, respiratory trouble, and refused feed than it saves, and the fire risk is priced in a currency no discount repays. Test the hay, then stack it — in that order, every time.
Keep reading
From the ranch

